Products

Not everything we build is custom. Check out these "standard" products designed to make your Sprinter or Transit camper van work better for you.


Storyteller MODE garage cabinet

A very practical storage cabinet that supports the MODE bed without needing the legs deployed. Sliding panels on the sides and hinged doors on the ends that match the MODE cabinet doors and drawers exactly. Stainless steel hardware and adjustable height interior shelves. Can be shipped fully assembled anywhere in the country for easy DIY installation...just lift it in and bolt down to the L-track. $2800.

More info

Storyteller MODE garage bench

We've combined the MODE storage stool and bed extension to make something that does more than one thing. Two flip-up cushioned seats that can be removed and attached to each other to form the longer cushion needed for the bed extension. All that plus a small storage cabinet next to the galley accessed via a cabinet door that matches the MODE drawers and cabinet doors exactly. Use it to hold your Berkey or turn it into a waste basket with a flip-up lid. $2,750.

More info

Revel/DIY galley replacement

Do you have an older Revel? Are you planning a DIY build? If so, this product is for you. Forward facing, drawer-style fridge/freezer. Stainless deep sink. Soft-close drawers. Drop-down exterior table. Custom switch panel. Flip-up counter extension. Bamboo drawer insert/cutting board. $6,099 including Isotherm Drawer 65L fridge/freezer. Installation is NOT included and if desired, needs to be handled under a separate agreement.

More info

NEW: Storyteller MODE bike mount

For those people who like to store their bikes inside their van, we offer this solution that works for a variety of bike sizes including 29er XL. Our bike mount keeps two bikes behind the galley and features an adjustable riser bar that can raise the rear wheel a maximum of 3.79" off the garage floor (5.56" with our double-riser) and an adjustable fork mount bar that allows fore and aft adjustment with vertical as well as horizontal fork mount locations (to offset handlebars). The fork mount bar can extend to the van doors to accommodate larger bikes. The bike mount frame is securely bolted to the garage L-track in three places. $529 including fork mounts, mounting brackets, and L-track double lug studs.

More info

Storyteller MODE drawer bench

This is the result of a recently completed project. Dacron-wrapped foam on 18mm marine-grade plywood. Soft-close drawers, concealed hinges, and stainless steel hardware. All panels match what Storyteller builds into the MODE exactly. $2,895 as shown with Sunbrella or vinyl upholstery.

More info

Storyteller MODE bed extension

This is a great solution for people who want to sleep north-south in their van, but need to extend the bed to allow that to happen. The bed extension is made up of two cushions...one longer board cushion to span the width of the van to the galley counter, and one shorter non-board cushion to fill the leftover gap. The longer cushion is structurally enhanced to resist flexing. $949 for two-cushion model (MODE garage bench long cushion shown).

More info

Storyteller MODE storage stool

Need a place to sit in your garage to work at the MODE bed desk? This cushioned stool will sit you at the right height, has built-in storage under the cushion, and can be moved anywhere in, and out of, your van. It's perfect for couples that share the desk when one of you likes to stand and the other likes to sit. Pricing TBD.

More info

Storyteller MODE garage cabinet

- Lightweight aluminum extrusion framing with concealed locking connectors
- Blum concealed hinges
- 3/4" cabinet doors match MODE cabinets exactly
- Stainless steel slam latches
- 1/4" HDPE sliding and fixed panels
- 3/4" HDPE adjustable height shelves
- Heavy duty mounting hardware

Storyteller MODE garage bench

- Lightweight aluminum extrusion framing bolted securely to the MODE L-track
- Adjustable height seating from 23" to 28"
- Heavy-duty, stainless steel folding seat brackets (330 lb. capacity)
- Dacron-wrapped foam on 19mm marine-grade plywood board cushions
- Cushions can be removed, connected together, and used for the long bed extension cushion
- Your choice of upholstery material...even match your MODE upholstery
- 3/4" cabinet door matches MODE galley drawers exactly
- Customize the corner cabinet: use it to hold your Berkey or turn it into a waste basket with a flip-up lid

Revel/DIY galley replacement

- Lightweight aluminum extrusion framing with concealed locking connectors
Isotherm 65L drawer fridge/freezer
- Ruvati 15" x 20" sink. Includes cutting board, colander, and drain grate
- Jabsco water pump
- Dovetail solid birch drawers with soft-close, full-extension slides
- 1/2" white Corian countertop
- 3/4" bamboo drop-down exterior table
- Custom switch panel for relocation of existing controls
- Optional second panel for relocating switches to forward end of cabinet
- Six push button lighted switches including reverse polarity controller for awning
- Two new outside AC outlets
- 10" or 12" flip-up bamboo counter extension above fridge/freezer
- Bamboo drawer insert for L-shaped cooking configuration...also serves as a cutting board
- Two perforated aluminum vents over fridge and in outside cabinet wall
- Heavy duty mounting hardware
- Does NOT include installation

Storyteller MODE bike mount

- Lightweight aluminum extrusion framing
- Adjustable quarter-round riser bar for rear wheel. Double-riser is optional.
- Adjustable fork mount bar that slides fore and aft as needed
- Adjustable fork mounting locations: side to side, vertical mount, and horizontal mount
- Bolts to L-track using included double lug studs
- Two MBP fork mounts included. Your choice of quick release and/or thru axle.

Allows a variety of bike sizes to be mounted behind the MODE galley, in front of the van doors...including 29er XL. Combining vertical and horizontal fork mount locations allows the bike handlebars to be offset.

Storyteller MODE drawer bench

- Lightweight aluminum extrusion framing with concealed locking connectors
- Your choice of upholstery material
- Dacron-wrapped foam on 18mm marine-grade plywood (will not warp!)
- Dovetail birch drawers with soft-close, full-extension slides
- Blum concealed hinges
- 3/4" drawer fronts match MODE drawers exactly
- 3/4" cabinet doors match MODE cabinets exactly
- Stainless steel real metal push button latches
- Stainless steel locking slam latches
- Gasketed "captive" HDPE panel...will not rattle!
- Heavy duty mounting hardware